Categories
Uncategorized

Get a receiver

General information and recommendations

Aviolog device is a high-quality receiver with a single built antenna suitable for office or outside installation. It’s built on Mode-S technology specially developed for the receiving and decoding ADS-B and ACARS messages coming out of an aircraft. The unit has been EMC tested and approved by certified laboratory so it can be hosted on the public places such as airports.

The Aviolog kit consists of:

  • 1. Aviolog device (indoor use only!).
  • 2. Power adapter – AC power input 100-240 V AC 50/60Hz, +5.1V DC output.
  • 3. Airband antenna (indoor/outdoor use) and antenna mounting kit.
  • 4. Coax cable (indoor/outdoor use, L = 5m, N-type connectors).
  • 5. Wi-Fi antenna (already attached to the AVIOLOG device, 50mm length).
Dimensions
  • Device: 116x116x40 mm, weight 580g
  • Multiband airband antenna: 600mm, weight 200g
  • Low loss RF cable, length 5m, weight 380g
Operating requirements
  • Power: 2.5A DC, 5.1V adapter
  • Operating environmental temperature: Room temperature (0°C-40°C)
  • 2.4 GHz Wi-Fi connection
Operation information
  • Noiseless
  • Power consumption: ~5W
  • Internet consumption: ~1kbps

Installation instructions

STEP 1: Find a permanent location of your Aviolog device that will maximize the reception of messages but also allow stable, non-interrupted Wi-Fi connectivity. Aviolog device is intended for indoor use only. Connect the small Wi-Fi antenna to the device vertically up. To improve Internet link, orient the side of the Wi-Fi antenna toward your Wi-Fi router.

STEP 2: Install the Airband antenna outdoors. Try to find place with as much of a sky view in all directions as possible, ideally without any obstacles when looking toward the nearest airport or regular flight routes. Airband antenna may be also attached directly to Aviolog device. Use this option only if you cannot place Airband antenna outdoors. Indoor Airband antenna installation significantly reduces quality of signal reception.

STEP 3: It is recommended to use Coaxial cable and antenna mounting kit to install your Airband antenna outdoors, so for outdoor installing connect Aviolog device with the Airband antenna using the Coax cable.

STEP 4: Power-up the device connecting the Power adapter with micro-USB connector to the Aviolog device. After connecting, the small green LED below the micro-USB connector should be on.

STEP 5: Connect your Aviolog device to the internet via Wi-Fi network. In this purpose you will need your smartphone (Android/iOS) or a computer with a Wi-Fi to help device fetch your Wi-Fi router connection. For detailed explanation please read the Installation manual clicking on the below button.


Get benefits for feeding commercial aviation data!
  • All feeders play a significant role in the safety of the air traffic, as our policy is that each civil aviation authority around the globe should have full historical access to true data in their area of jurisdiction.
  • We are the only flight tracking platform that offers the possibility of getting the digital currency incentives for installing the device and feeding data to the Aviolog system. All feeders are entitled to certain token benefits depending on feed status! When a feeder has installed the device at his premises, he is eligible to earn from the data he fed to the system! The more confirmed data a feeder submits to the system, the more the benefit.
  • We provide you full access to the flight monitoring platform which is otherwise limited to certain information alone! Get the most accurate information on flights without advertisements, with aircraft details, weather information and layers, METAR data, airport data, delays and cancellations, additional prolonged period of 2 years flight playbacks, and much much more.

Leave a Reply

Your email address will not be published. Required fields are marked *